Anti-bird net is the most used anti-bird facility in agriculture

Anti-bird nets are the most commonly used anti-bird facilities in agriculture. In a certain season, there are many birds flying around on crops. This will lead to a reduction in crop production for a long time. In the face of this problem, prevention Bird nets play a very important role, but what about the construction of bird nets?
1. The anchor is fixed on the ground to ensure the stability of the column. To set up a bird-proof net, you need to connect horizontally and vertically with iron wires to form a grid. After fixing the two ends of the iron wire, you need to tighten the iron wire with a wire tensioner, and then fix it. The next step is to set up the net.
2. The erection of the anti-bird net should be based on the height of the fruit tree, and the column must exceed the height of the fruit tree by more than 1.5 meters. The steel pipes are erected every ten meters in the horizontal direction and every twenty meters in the longitudinal direction. The bottom of the steel pipe shall be irrigated with cement, and the depth of the irrigated cement is about 70 cm.
3. Thread the mesh line according to the pace. Put the net on the shelf and fix the two sides of the net line. First, let’s pass through the wire of the skynet. After opening the anti-bird net, find the side of the width and use the wire to pierce the grid. A piece of rope is left at each end and tied to the edge of the grid at both ends. In this way, the width side can be quickly and accurately opened during the installation process. The blue or black end of the bird-proof net is a reinforced side, which acts as a reinforcement to prevent the net from tearing.